Click Here for Step-By-Step Instructions

1. In the Complete Campus Security Solution software, go to Help, and then Register License
2. Enter your name in, the software will provide you with a Registration ID
3. Go to www.identakid.com/ereg
4. Click on New User
5. Enter the Registration ID and the Name you entered in the Software (sometimes it is easiest just to copy and paste this information)
6. Fill in all the required information (please make sure to write this password)
7. Click on Submit
8. Verify all the information, if it is correct click Finish
9. On the screen click Ok it will take you to the User Console
10. Select you Registration ID and then click on Get/Renew License
11. Your License will be emailed to your email address

Our Support Policy and other policies can be found here.

• Windows XP (Service Pack 3), Windows Vista (Service Pack 2), or Windows 7
• 1 GHz 32-bit (x86) processor or faster
• Atleast 512MB of RAM for XP, or 1GB of RAM for Vista/Windows 7
• Atleast 100MB of available space on the hard disk
• CD-ROM or DVD-ROM Drive
• Keyboard and Mouse or some other compatible pointing device
• Video adapter and monitor with Super VGA (1024 x 768) or higher resolution
• Sound Card (Optional)
• Speakers (Optional)

The software is setup to make sure you have the most current version. Contact your local Ident-A-Kid Program Director to ensure that you have the latest version. They will also provide you with the upgrade code at that time. If your Program Director contact information is not in the Default Settings screen, go to Ident-A-Kid, and click on Local Programs or call the National Office at 800-890-1000.

Virtually any printer that works with your computer can be used to print reports from CCSS. Make sure though you have the report printer you want to use selected in the Default Settings of the CCSS software.

First, check that the Power and USB cables are hooked up properly. Then, see if you can print a test page from Windows. If you can print a successful test page, check the CCSS Utilities / Default Settings, and make sure the Dymo printer is selected as the default printer. If you cannot print a test page from Windows, check to see that driver was properly installed and then contact Dymo.

Click on Utilities and then go into default settings. Under the badge that you would like to be printed choose Paper Size is set to "Ident-A-Kid labels". If you have a Dymo Twin printer choose the correct side under Paper Source. For hall passes choose Continuous, Wide for the Paper Size.

CCSS is designed to be used only with a proprietary scanner, you can order from your local Program Director or on our website click the Order tab above.

The web cam supplied through CCSS will work perfectly with the system, but most current USB web cams will work with fineCCSS. Just hook up your webcam per its instructions, then go to Utilities/Default Settings in CCSS and select the Capture Webcam Image box in the badges you wish to capture it in. If you also want the image printed on the badge, select it in the corresponding Graphic Option, too.

First, assure that it works outside CCSS. If it does not, the driver might need to be reloaded or it could be defective. Check with the manufacturer for further information. If the webcam does work outside CCSS, assure that the webcam options are selected in the Default Settings within CCSS. Also make sure there is no other software running that uses the webcam (i.e. manufacture) software running in the background.

In order CCSS to work in Windows Vista/7, you must first disable User Account Control. To disable this feature click on Start, then Control Panel, then in the left column click on “Classic View”. Scroll down to and double click on User Accounts, in the User Accounts window click on “Turn User Account Control on or off.” On the next screen un-check the box that says “Use User Account Control (UAC) to help protect your computer” Then restart the computer.

Although CCSS was not specifically designed to run on a network, many schools have got it to run on their school networks. The key is to make sure that the folder that contains the CCSS files
(C:\Program Files\IDENT-A-KID Services of America\ISA Complete Campus Security System)
or for new installs
(C:\Program Files\IDENT-A-KID Services of America\ISASecurity)
be given full permission to both read and write by all users.

This is not a problem if the Admin account gives full read and write permission for all users to the CCSS folder located at:
(C:\Program Files\IDENT-A-KID Services of America\ISA Complete Campus Security System)
or for new installs
(C:\Program Files\IDENT-A-KID Services of America\ISASecurity)

In order to add a graphic to each individual badge, get the image/graphic file in .wmf format (you will probably have to use a graphics program) the software also supports logo pictures in .jpg, .jpeg, and .bmp formats as well, and make a copy for each badge that you want the logo on. Then remove these files 1.wmf, 2.wmf, 3.wmf, 4.wmf, 5.wmf and 6.wmf and replace them with you logo you renamed to the either 1, 2, 3, 4, 5, 6 and 7 for the corresponding. Then copy the files to:
C:\Program Files\IDENT-A-KID Services of America\ISA Complete Campus Security System
or for new installs
(C:\Program Files\IDENT-A-KID Services of America\ISASecurity)

Then, go to CCSS Utilities/Set Defaults and click on the Include Graphic on the Graphic Image option for each badge you desire.

First assure the webcam is installed properly. Then go to Utilities/Default Settings and select Capture Webcam Image and select Use Webcam Image in the Graphic Option for each badge you wish to capture an image for.

This is a link to the U.S. Department of Justice’s web site for access to convicted sexual offenders throughout the U.S. It works in two ways: 1) You can search a particular name to see if they are listed as a convicted sexual offender, or 2) You can search a particular zip code to see if any convicted sexual offenders live in the area.
Note: You must have Internet access to use this feature.

Go to the Utilities/Default Settings screen and click on back up data. Then, select where you want to save data to.

First, back up the data (see above), then go to the Utilities/Default Settings screen and click on Clear All Data.

In the Utilities/Default Settings screen, you can type frequent visitors’ names into the Preload Names window or you can import them in from a text file. Once names are loaded, you can sort on either first or last name by clicking on the appropriate button.

First, create a comma delimited text file called CCSS.txt with names to preload. Then, go to Utilities/Default Settings and click on Import Names.

The easiest way to customize reports is to export a report to a file and then import the file into Excel or some other report and then customize it to your requirements.

Click on Utilities and go to RFID Card Management. If there is not cards set-up it will ask you to input all the information. First choose a badge type, then click on Card ID, when you are in the Card ID field tap the badge on the RFID reader and the card number will be entered. Then enter the last and first name of the person you are giving the badge to. Once all the fields are entered press save.

Go to utilities, then Default Settings, and fill in the Welcome Lines.